ABB SACE Tmax XT2 - Page 115

1SDH002031A1002 ECN000092998 Rev. B SACE Tmax XT2 – XT4 | 115
Bus Test
The parameter allows enabling/disabling the changing of parameters from the service connector,
limiting the possibility of configuring all the options on the display (in Local mode) or from Ekip
Com modules (in Remote mode).
If the parameter is disabled, Local mode and use of the password provide security against
unwanted changes by unauthorized personnel.
NOTE: with Test Bus = Off the communication from the service connector is still
guaranteed (reading is allowed)
Ekip Touch is supplied with the parameter set to: On.
System
The System menu has several options:
Parameter
Description
Default
Data
Set the current date
Time
Set the current time
Language
Set the language in the display menus
English
Password
Set the password, see page 33 for details
00001
IMPORTANT: setting and checking the Date and Time is important for all logging
functions (trip or measurements). If there is a malfunction with the date and time
reset and if necessary replace the Ekip Touch battery (see 1SDH001000R0509)
View
The View menu allows access to the configuration of the Client Page:
Parameter
Description
Default
Client page
It allows activating an additional information page, accessible
by pressing the iTEST button twice from any page with the
diagnosis bar.
The configuration of the information on the new page is
allowed via Ekip Connect (page 118)
Off
Display Contrast
Sets the contrast of the Ekip Touch LCD display.
Maintenance
The parameter allows enabling/disabling an alarm related to unit maintenance, described on
page 99.
Ekip Touch is supplied with the parameter set to: On.