ABB SACE Tmax XT2 - Page 28

1SDH002031A1002 ECN000092998 Rev. B SACE Tmax XT2 – XT4 | 28
Measurements
Menu
Menu
Submenu
Description
Page
Log
Openings
Description in the dedicated chapter
97-101
Events
Description in the dedicated chapter
97
Measurements
Description in the dedicated chapter
98
Power factor
(1)
--
Description in the dedicated chapter
102
Frequency
(1)
--
Frequency measured
100
Energy
(1)
Energy Counters
Description in the dedicated chapter
102
Counter Reset
Counter reset command
102
Energy RESET
Description in the dedicated chapter
102
Peak factor
(1)
--
Description in the dedicated chapter
102
Harmonic distor
--
Control to enable harmonic
distortion of the powers
44
Ekip
Synchrocheck
(2)
--
Description in the dedicated chapter
173
Network Analyzer
(3)
V sequence
Measurements associated with the
Network Analyzer function: list and
description in the dedicated chapter
106
V 3s sequence
THD Current
THD Voltage
Counters
Maintenance
Contact wear
Installation and maintenance dates
and commands
99
LastServiceWearWith
Installation
Last maintenance
Service RESET
NOTES:
(1) Available if required by the Trip unit model or if the Measuring package has been
enabled
(2) Available with the Ekip Synchrocheck module
(3) Available if required by the Trip unit model or if the Network Analyzer software
package has been enabled