42 CI/FSS/FSV430/450-EN Rev. D | SwirlMaster FSS430, FSS450 VortexMaster FSV430, FSV450
Change from two to one column
7.3.4 Parameter overview
NOTE
This overview of parameters shows all the menus and parameters available on the device. Depending on the version and
configuration of the device, not all of the menus and parameters may be visible in it.
The various operating modes have different menu displays. In this overview, the menus that are displayed only in certain
operating modes are marked with numbers. The numbers represent the operating modes as follows:
Operation modes
1) Liquid Mass 8) Bio Act. Volume
2) Liquid Volume 9) Liquid Power
3) Gas Mass 10) Gas Act. Volume
4) Steam Mass 11) Gas Power
5) Gas Std/Norm Vol. 12) Steam Act. Volume
6) Bio Std/Norm Vol. 13) Steam Power
7) Liquid Std/Norm Vol.
Easy Setup
Language
Active Mode
Current Output
DO Function
Pulses Per Unit
Pulse Width
Lower Freqency
Upper Freqency
Logic on DO
Unit Qv
Unit Qm
1) 3) 4)
Unit Qnv
Unit Qpower
Unit Density
1) 3) 4)
Unit Temperature
Unit Pressure
3) 4) 5) 6)
Unit Volume
Unit Mass
Unit Std/Norm Vol.
Unit Energy
Hart In Value
Analog In Value
T Ext. Upper Range
1) 4) 5)
6) 7)
T Ext. Lower Range
1) 3) 4)
5) 6) 7)
Pressure Upper Range
Pressure Lower Range
P(abs) Upper Range
P(abs) Lower Range
Density Upper Range
Density Lower Range
Gas% Upper Range
Gas% Lower Range
Continued on next page