ABB SYNCHROTACT 5 - Page 138

Operating Instructions SYN 5201/SYN 5202
Document No Art Part Language Revision page
abb
ABB Switzerland Ltd
3BHS109762 E01
en D 138
Template: CHIND Techn doc stand, A4 P de, R1.DOT; Filename: 3BHS109762E01 D.doc; Print: 12/6/2011 5:48:00 PM; Save: 12/1/2011 2:37:00 PM; CHIND No. 3BHS109763 ZAB D14 Rev. -; I-Q
Modifications
Rev.
Ind.
Page (P)
Section (S)
Descriptions
(or revision status)
Date
Dept./Exec.
A All sections Completely revised 00.07.06;
ICA/WZ
B S 2.2.2 Addition to the description regarding variable pause
intervals of voltage and frequency matchers
02.01.07;
ATP/WZ
B S 2.6 New 02.01.07;
ATP/WZ
B S 2.7 New 02.01.07;
ATP/WZ
B S 3 and S 4 Completely revised:
- Division into two main sections (S 3 and S 4)
- Adaptation of the type code
- Addition of new functions: communication and
time synchronization
- Tables for configurable inputs/outputs revised
and moved from section on engineering
instructions to section 4
- Section on parameter settings moved from the
section on commissioning to section 4 and
addition of the following sections:
- Start conditions for the test function
- Cancelling the test function
- Monitoring time t supervis
- Multiple command generation
MULTIPLE ORD
- Release of the measuring voltages as no-
voltage U1not, U2not, 1*2not
02.01.07;
ATP/WZ
B Section
Engineering
instructions
Addition: connection of measuring voltages
Addition: use of the automatic synchronizer as
synchrocheck
02.01.07;
ATP/WZ
B S 7 Addition of ‘Cancel test function‘ to commands 02.01.07;
ATP/WZ
B S 8 Addition of the section: Adapting the matchers to
the system
02.01.07;
ATP/WZ
B S 8.3.2 Addition of the key to the signals and values of the
transient recorder
02.01.07;
ATP/WZ
B S 9 Error and event codes:
New code 061
Additions to code 123
02.01.07;
ATP/WZ
B S 10 Additions to technical data:
- Current consumption of the measuring inputs
- Max. output power of the auxiliary voltage
output
- Temperature range for communication
02.01.07;
ATP/WZ
B S 11 Addition of new interfaces to the schematic
diagrams
02.01.07;
ATP/WZ
B Insertion of this table 02.01.07;
ATP/WZ