Operation Manual / TPL76-C
3 Commissioning / 3.1 Oil supply
© Copyright 2018 . All rights reserved. HZTL2485_EN Revision F April 2018
3 Commissioning
3.1 Oil supply
A carefully designed and installed oil supply, which functions in all pos-
sible operational conditions, is an important prerequisite for trouble-
free turbocharger operation.
The turbocharger is normally lubricated with oil from the engine oil cir-
cuit.
NOTICE
With regard to the oil supply, please observe the engine builder's spe-
cifications for lubricating oil selection, oil change intervals, oil filtration,
oil pressure and oil temperature.
Oil filtration
A lubrication oil filter system with a mesh size ≤0.050 mm is adequate
for TPL76-C turbochargers.
NOTICE
This filter system can also be achieved by using an additional self-clean-
ing fine filter.
Page 28 / 133
To Next Page
Loading...
