Operation Manual / TPL76-C
8 Disassembly and assembly / 8.3 Removing and fitting filter silencer
or air suction branch
© Copyright 2018 . All rights reserved. HZTL2485_EN Revision F April 2018
Removing filter silencer
u Remove insulation where necessary.
u Pass lifting gear through rib on filter silencer and through eyelets at
rear.
u Unscrew nuts (74027) and remove them together with washers
(74018).
u Remove filter silencer and it set down to one side.
Fitting the filter silencer
u Fit filter silencer in reverse order.
Page 85 / 133
To Next Page
Loading...
