ABB TZIDC-200 - Sensor Range Adjustment

Mounting
14 TZIDC-200, TZIDC-210, TZIDC-220 42/18-85-EN
M00410
12
3
4
+30°
+60°
-60°
-30°
+100%
+100%
0%
0%
TZID-C
Fig. 4: Sensor range
1 Sensor range for linear actuators
2 Sensor range for part-turn actuators
3 Restricted operating range
4 Operating range
IMPORTANT (NOTE)
During installation make sure that the actuator travel or rotation angle for position feedback is
implemented correctly.
The maximum rotation angle for position feedback is 60° when installed on linear actuators and
120° on part-turn actuators. The minimum angle is always 25°.