Mounting
20 TZIDC-200, TZIDC-210, TZIDC-220 42/18-85-EN
4.2.3 Mounting on part-turn actuator
For mounting on part-turn actuators in accordance with VDI / VDE 3845, the following mounting
kit is available:
Fig. 12
• Adapter (1) with spring (5).
• Four screws M6 (4), four spring washers (3), and four shims (2) for attaching the mounting
bracket (6) to the positioner.
• Four screws M5 (7), four spring washers (8), and four shims (9) for attaching the mounting
bracket to the actuator.
Required tools:
- Wrench, size 10 / 13
- Allen key, size 3
To Next Page
