ABB TZIDC-200 - Operating Modes

Commissioning
42/18-85-EN TZIDC-200, TZIDC-210, TZIDC-220 29
7.1.1 Operating modes
Selection from the operating level:
• Press and hold down .
• Press and release rapidly as often as required. The selected operating mode is displayed.
• Release .
• The position is displayed in % or as a rotation angle.
Operating mode Mode indicator Position indicator
1.0
Control mode
1)
with adaptation (the control parameter)
1.1
Control mode
1)
without adaptation (the control parameter)
1.2
Manual adjustment
2)
in the operating range.
Adjust with or
3)
1.3
Manual adjustment
2)
in the sensor range.
Adjust with or
3)
1) Since self-optimization in operating mode 1.0 is subject to several factors during control operation with adaptation,
incorrect adjustments could be made over an extended period.
2) Position not active
3) For high-speed mode: Press and simultaneously
conf
mA
%
C
°
conf
mA
%
C
°
conf
mA
%
C
°
conf
mA
%
C
°
conf
mA
%
C
°
conf
mA
%
C
°
conf
mA
%
C
°
conf
mA
%
C
°