ABB TZIDC-200 - Saving New Setup

Commissioning
42/18-85-EN TZIDC-200, TZIDC-210, TZIDC-220 31
5. Switch to parameter 3.3 (Return to operating level) and save the new setup:
• Press and hold
• Press twice briefly
is displayed
• Release
• Press briefly to select
• Press and hold till the countdown goes from 3 to 0
The new parameter setting is saved and the positioner automatically returns to the working level
and continues to run in the operating level that was active before calling up the configuration
level.
conf
mA
%
C
°