Abus CFA 1000 - A) Replacement Of The Cylinder Lock; Mounting And Initial Operation

52
9. Mounting and initial operation
a) Replacement of cylinder lock
Iftheexistingcylinderlockdoesnotmeettherequirements(seesection7.b),anewcylinderlock
shouldbeprocuredaftertakingthenecessarymeasurements.
- Openingdoor
- Insertkeyintolock
- Removefasteningscrewwithsuitable
screwdriver
- Extract cylinder lock by the key, if
necessary,turnkeyslightly.
- Insertnewcylinderlockwithinserted
key.
- Position the cylinder lock in such
mannerthatthefasteningscrew
canbescrewedintotheappropriate
holeofthecylinderlock.
- Makesurethatthecylinderprojects
insideapprox.8mmto15mm
- Fastencylinderlockwiththefastening
screw
- Lock door with the key from inside
andoutsidetotestit,makesurethat
itturnseasily.
- Testemergencyopeningfeaturewith
asecondkey
1 2
3 4