Abus CFA 1000 - B) Registering Remote Control On The Door Lock Actuator

62
b) Registering remote control on the door lock actuator
 Noremotecontrolisregistered/programmedindeliverystatus.Thusthedoor
lockactuatordoesNOTreacttotheradioremotecontrolincludedindelivery.
Please note:
 Therstremotecontroltobeprogrammedisautomaticallythe„Master“remote.
Storageplace„1”isreservedforthisremote.
Register/programmerstremotecontrol:
 • Presstheupperkey”Unlock”onthedoorlockactuatorforabout2seconds
tostarttheregistrationprocess.
+
 Ifyoupressthekey”Unlock”againforalongperiod(presskeyfor
about2seconds)theregistrationprocessisinterruptedwithoutthe
radioremotecontrolbeingregistered.
  Theregistrationprocedureisautomaticallycompletedifnokeyis
pressedonthedoorlockactuatororontheradioremotecontrolfor
threeminutesafteraccessingthemenu.
 • Storageplace„1“appearsintheLCdisplayThesymbolsforradioreception
and„Unlock“ash;thedoorlockactuatorisreadytoreceivethedesired
transmittercode.
 • Toregistertheradioremotecontrol,pressanydesiredkeyoftheradioremote
controlforapprox.1second.
 • Thedisplayemits”ok”ifthecodeissuccessfullyreceivedandexitsthemenu
(display”M”onthedisplay)withthreeshortaudiosignals.
Register / programme a further remote control:
 • Presstheupperkey”Unlock”onthedoorlockactuatorforabout2seconds
tostarttheregistrationprocess.
 • ”X”appearsintheLCdisplay;thesymbolsforradioreceptionand”Unlock”
ash(youcanabortltheprogrammingprocedureasdescribedabove).
 • Now press a desired key on the ”Master” remote control for approx. one
secondtillafreestorageplacesuchas,forexample,„2”isdisplayedinstead
of”X”
 • Anotherstorageplacecannowbeselectedonthedoorlockactuatorwith
thekeys„Unlock“or„Lock“,ifrequired.
 • Toregistertheradioremotecontrol,pressanydesiredkeyoftheradioremote
controlforapprox.1second.