Abus CFA 1000 - D) Inserting Batteries In The Door Lock Actuator

56
d) Inserting batteries in the door lock actuator
1 2 3 4
1 Unclipandremovethebatterycompartmentcoveronthebottom.
2 Illustrationinthebatterycompartmentforinsertionofthebatterieswiththecorrectpolarity
3 Insertthreebatteries(AA,Mignon)withthecorrectpolarity
4 Putonbatterycompartmentcoverandsnapiton.
 Afterinsertionofthebatteries,thedoorlockactuatorcommencestoquerythebasic
settings,seesection10.
 Thebasicsettingsareabsolutelyessentialforinitialoperationsothatthedoorlock
actuatorcanfunctioncorrectly.Carryouttheadjustmentworkcorrectlyandmeticulously
asonlythenisfaultlessfunctionensured.
 Renewedbasicsettingswillalsobenecessaryifthedoorlockactuatoristobemounted
onanothercylinderlockoranotherdoor.