Accu-Chek ACTIVE User Manual

25
4
Testing blood glucose
As long as the test result is being
displayed on the display, you can
set a test reminder.
Press the S button or M button
repeatedly until the Test
reminder marker ( symbol) is
displayed.
The test result is saved together
with the symbol (Before meal).
1
mg/dL
meter
mmol/L
meter
Setting a test reminder
In two hours, you will be
reminded to perform a blood
glucose test. The flashing symbol
appears on the display. At the
same time, a beep sounds once
per second.
You can now perform a blood
glucose test.
Slide the test strip into the test
strip guide and perform a blood
glucose test.
As soon as you slide the test
strip in, the test reminder is
turned o.
The test result is saved together
with the symbol (After meal).
If you decide not to perform a
test, press the M button or S
button to turn the test reminder
o.
2
i
If the meter is switched on at
the time of the test reminder,
the meter cancels the test
reminder.
If you perform a blood glucose
test up to 1 hour before a test
reminder, the meter cancels
the test reminder.
If you do not perform a blood
glucose test at the time of the
test reminder, you can still
perform the blood glucose test
within half an hour of the test
reminder.
In both cases, the test result is
saved together with the
symbol (After meal).

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH