Accu-Chek Aviva User Manual

22
4. Select the control solution you
want to test. You will enter the
level later in the test.
5. Place the meter on a flat
surface, like a table.
6. Remove the control bottle cap
and wipe the tip of the bottle
with a tissue.
7. Squeeze the bottle until a tiny
drop forms at the tip. Touch the
drop to the front edge of the
yellow window of the test strip.
Do not put control solution
on top of the test strip. When
you see
flash, you have
enough control solution in the
test strip. Wipe the tip of the
bottle with a tissue then cap
the bottle tightly.
OR

Accu-Chek Aviva Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Battery Type	1 x 3V lithium (CR2032)
Operating Humidity	10% to 90% RH
Meter Weight	59 g
Measuring Range	10 mg/dL to 600 mg/dL
Automatic Shut Off	After 90 seconds of inactivity