Accu-Chek Compact Plus Reference Manual

191
Symbols, error messages and troubleshooting
12
Error message Meaning
쑺쑺
Turn the meter off and then on again
by pressing the Test button. Repeat
the test with a new test strip.
앫 You drew up blood or control solution
too soon with the test strip, i.e. before
the test strip symbol and drop symbol
were flashing in the display.
Turn the meter off and then on again
by pressing the Test button. Repeat
the test with a new test strip. Only
draw up blood or control solution with
the test strip when the test strip sym-
bol and drop symbol are flashing in
the display.
You pulled the test strip out of the meter
during testing.
Turn the meter off and then on again by
pressing the Test button. Repeat the test
with a new test strip. Only remove the test
strip from the meter by pressing the Test
button to turn the meter off.
AC_CP_LCM_Manual_EN-UK final.indd 191_CP_LCM_Manual_EN-UK final.indd 191 20.6.2007 11:04:4620.6.2007 11:04:46

Accu-Chek Compact Plus Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1.5 µL
Test Time	5 seconds
Automatic Coding	Yes
Display	LCD
Measurement Method	Electrochemical
Battery Type	2 x AAA
Battery Life	Approx. 1000 tests
Data Transfer	Infrared (IR)
Storage Conditions	-25°C to +70°C
Operating Conditions	10-40°C, 10-90% RH