23
Entering settings
3
When you turn the meter on for the first time to enter settings, it dis-
plays the following factory defaults. You can change these to suit your
personal situation:
O Time-and-date format: 24h (with accompanying date format day-
month/DD-MM)
O Time: 0:00
O Date: December 31 in the year of manufacture, displayed as 200X
12-31 (despite this, when you perform a blood glucose test the
meter displays 0- 0 for the day and month if you have not entered
any settings)
O Beep tone on, Acoustic Mode off
O Target range off
O Alarm clock function off
To Next Page
Loading...
