Farbe: P 021 – Prüfmittelnummer: 201
You can only turn the alarm clock function on (0n) and set alarm
times when you have also set the date and time.
If you lose the date and time settings while changing the battery
(see Chapter 10 “Changing the battery”), all alarms are automati-
cally turned off (0FF). All of the times you set, however, are
retained in the meter’s memory. You then need to turn the alarms
on again (0n).
If you have turned the alarm clock function on, the meter will
always beep to remind you to test your blood glucose even if the
beep tone itself is turned off (see Chapter 3.2.5). The beep tone
setting has no influence on the alarm clock function.
To Next Page
Loading...
Need help?
General
