Acer AO725 - WLAN (Wireless Local Area Network) Module Removal

3-12 Machine Maintenance Procedures
WLAN (Wireless Local Area Network) Module Removal 0
Prerequisite:
Base Door Removal
1. Find WLAN module (B) on the base assembly. Refer to Figure 3-6.
Figure 3-6. Component Location
2. Disconnect main (C) and auxiliary (D) antennas connected to WLAN card (Figure 3-7).
3. Remove one (1) screw (A) securing the WLAN module in place (Figure 3-7).
Figure 3-7. WLAN Module
A
B
C
A
C
D