System Utilities 2-17
WinFlash Utility 0
Perform the following to use the
WinFlash Utility
:
1. Copy the WinFlash executable
ZHG009W.EXE
to desktop.
2. Double-click the
ZHG009W.EXE
to start the flash process.
3. Click
OK
to begin update. A progress screen is shown as Figure 2-15.
4. System will restart automatically when the Flash Process finished.
Figure 2-15. InsydeFlash
This feature is only functional when the AC power adapter is connected. It
is recommended to have the AC adapter and Battery present when using
WinFlash Utility.
To Next Page
Loading...
