Machine Maintenance Procedures 3-45
LVDS and Camera Cable Removal 0
Prerequisite:
LCD Panel Removal
1. Remove the yellow tape (A) securing the LVDS and camera cable on the rear of the
LCD panel (Figure 3-46).
Figure 3-46. LVDS and Camera Cable
2. Starting from the top, remove the clear mylar tape (B) and disconnect the LVDS cable
from the LCD panel connector (C) (Figure 3-47).
Figure 3-47. LVDS Cable
3. Remove the LVDS and camera cable from the LCD panel
.
To Next Page
Loading...
