Machine Maintenance Procedures 3-27
LED Board Removal 0
Prerequisite:
Upper Case Removal
1. Find LED Board (C) on the base assembly. Refer to Figure 3-23.
2. Disconnect LED board FPC (B) from mainboard connector (A) and LED board
connector (E) (Figure 3-26).
3. Remove one (1) screw (D) securing the LED board in place (Figure 3-26).
Figure 3-26. LED Board
4. Remove the LED board (C) from the base assembly (Figure 3-27).
Figure 3-27. LED Board Removal
To Next Page
Loading...
