Acer AO725 - LCD Reassembly Process; Replacing the LVDS and Camera Cable

3-46 Machine Maintenance Procedures
LCD Reassembly Process 0
Replacing the LVDS and Camera Cable 0
1. Connect the LVDS cable to the LCD panel connector (C) and adhere the clear mylar
tape (B) to secure it (Figure 3-48
).
Figure 3-48. Connecting the LVDS Cable
2. Adhere the yellow tape (A) to secure the LVDS and camera cable in place
(Figure 3-49).
Figure 3-49. LVDS and Camera Cable
B
C
A