Acer AO725 - Using Uuidtools

2-26 System Utilities
Using UUIDTools 0
The UUID (Universally Unique Identifier) Tool copies BIOS information to EEPROM
(Electrically Erasable Programmable Read-Only Memory). Used in the DMI pool data for
hardware management.
To use
UUID to update the DMI Pool, perform the following:
1. Unzip UUID package tool,
ZHG.zip , to a bootable USB Flash Disk.
2. Edit
ZHG.bat file with Windows Notepad under the ZHG folder. (Figure 2-31)
Figure 2-31. Editing the UUID File
3. Boot from USB and excute
ZHG.bat under DOS mode. (Figure 2-32)
Figure 2-32. UUID
4. System will run
VEEP_795.EXE to write any changes in the data to the EEPROM and
restart automatically when the process finished.
Microsoft(R) Windows 98
(C)Copyright Microsoft Corp 1981-1999.
C:\
>
ZHG
Write Data to EEPROM ( From [0h] to [9h] ) :
Please wait for progamming...
Compare Data with EEPROM ( From [0h] to [9h] ) :
Please wait for Comparing...
Write Data to EEPROM ( From [6h] to [6h] ) :
Please wait for progamming...
****
Enter the MAC ID -Sample:001636XXXXXX(_________)