Acer AO725 - Switch Board Removal

3-20 Machine Maintenance Procedures
Switch Board Removal 0
Prerequisite:
Upper Case Removal
1. Find switch Board (A) on the top assembly. Refer to Figure 3-17.
2. Disconnect touchpad FPC (B) from switch board connector (D) and touchpad
connector (E) (Figure 3-17).
3. Remove two (2) screws (C) securing the switch board in place (Figure 3-17).
Figure 3-17. Switch Board
4. Remove the switch board (A) from the top assembly. (Figure 3-18).
Figure 3-18. Switch Board Removal
C
C
D
E
A
B
A
B
D
C
A