Machine Maintenance Procedures 3-61
Replacing the LED Board 0
1. Place and insert the LED Board (C) into its comparment on the base assembly
(Figure 3-66).
Figure 3-66. Replacing the LED Board
2. Install and secure one (1) screw (D) to the LED board (Figure 3-67).
Figure 3-67. LED Board
3. Connect LED board FPC (B) to mainboard connector (A) and LED board connector (E).
(Figure 3-67).
ID Size Quantity Screw Type
D M2.0*4.5 1
To Next Page
Loading...
