Acer AO725 - Thermal Module Removal

Machine Maintenance Procedures 3-33
Thermal Module Removal 0
Prerequisite:
Mainboard Removal
1. Find the thermal module (C) on the mainboard. Refer to Figure 3-31.
2. Disconnect the thermal fan cable from mainboard connector (B) (Figure 3-32).
3. Remove three (3) screws (A) in reverse numerical order from three (3) to one (1).
Refer to Figure 3-32.
4. Remove thermal module from the mainboard.
Figure 3-32. Thermal Module
ID Size Quantity Screw Type
A M2.0*3.0 3
1
2
3
B
A
A