Acer AO725 - Main Unit Reassembly Process; Replacing the LCD (Liquid Crystal Display) Module

Machine Maintenance Procedures 3-53
Main Unit Reassembly Process 0
Replacing the LCD (Liquid Crystal Display) Module 0
1. Place the LCD Module on the base assembly (Figure 3-59).
Figure 3-59. Replacing the LCD Module
2. Align LCD hinges with the hinge guides on the Base Assembly (Figure 3-59).
3. Install and secure three (3) screws (A) to LCD hinges (Figure 3-60).
Figure 3-60. LCD Module
A
A
B