System Utilities 2-27
To use
UUID
to modify the manufacture name, perform the following:
1. Unzip UUID package tool,
ZHG_Manufacture.zip
, to a bootable USB Flash Disk.
2. Edit
ZHG_Manufacture.bat
file with Windows Notepad under the ZHG_Manufacture
folder. (Figure 2-33)
Figure 2-33. Editing the UUID File
3. Boot from USB and excute
ZHG_ACER.bat
under DOS mode. (Figure 2-32)
Figure 2-34. UUID
4. System will run
VEEP_795.EXE
to write any changes in the data to the EEPROM and
restart automatically when the process finished.
Microsoft(R) Windows 98
(C)Copyright Microsoft Corp 1981-1999.
C:\
>
ZHG_Acer
Write Data to EEPROM ( From [0h] to [9h] ) :
Please wait for progamming...
Compare Data with EEPROM ( From [0h] to [9h] ) :
Please wait for Comparing...
Write Data to EEPROM ( From [6h] to [6h] ) :
Please wait for progamming...
****
Enter the MAC ID -Sample:001636XXXXXX(_________)
To Next Page
Loading...
