Machine Maintenance Procedures 3-23
LED Board Removal 0
Prerequisite:
Upper Case Removal
1. Locate LED board (A) on upper case. (Figure 3-21)
Figure 3-21. LED Board
2. Remove LED board FFC (D) from upper case adhesive.
3. Remove screw (C) from upper case.
LED board is secure to lower case guide. Use caution when lifting.
4. Lift LED board until clear of guidepins (B) on upper case.
5. Slide and remove LED board from guide (E). (Figure 3-22)
Figure 3-22. LED Board Guide
To Next Page
Loading...
