Acer Aspire ONE 722 - WLAN Module Removal; WLAN Module Installation

Machine Maintenance Procedures 3-17
WLAN Module Removal 0
Prerequisite:
Uniload Door Removal
1. Locate WLAN module (A) on mainboard. (Figure 3-12)
Figure 3-12. WLAN Module
2. Disconnect WLAN main (D) and auxiliary (C) antenna cables from WLAN module.
3. Remove screw (B) from WLAN module.
4. Disconnect WLAN module from mainboard connector (E).
WLAN Module Installation 0
1. Connect WLAN module (A) into mainboard connector (E).
2. Install and secure screw (B) to WLAN module.
3. Connect WLAN main (D) and auxiliary (C) antenna cables to WLAN module.
4. Install uniload door.
ID Size Quantity Screw Type
B M2.0x3.0 1
A
C
B
D
E