Machine Maintenance Procedures 3-29
Mainboard Installation 0
1. Align and install mainboard with guidepins (L) on lower case. (Figure 3-27)
2. Install and secure screws (E) to lower case.
3. Connect DC-IN cable (H) to mainboard connector (J).
4. Secure mylar (K) over DC-in cable and mainboard connector.
5. Connect the following cables:
Bluetooth cable (A) to mainboard connector (B)
Speaker cable (C) to mainboard connector (D)
LCD cable (F) to mainboard connector (G)
6. Install upper case.
7. Install USB board.
8. Install HDD module.
9. Install WLAN module.
10. Install 3G module.
11. Install DIMM module.
ID Size Quantity Screw Type
E M2.0x3.0 2
To Next Page
Loading...
