2-16 System Utilities
DOS Flash Utility 0
Perform the following to use the DOS Flash Utility:
1. Press F2 during boot to enter Setup Menu.
2. Select Boot Menu to modify boot priority order.
3. Move USB HDD to position 1 (Figure 2-14). (Refer to Boot menu)
Figure 2-14. Changing BIOS Boot Priority Order
4. Copy BIOS.BAT to USB HDD.
5. Insert the USB HDD and reboot computer.
6. Execute BIOS.BAT to update BIOS. (Figure 2-16)
Figure 2-15. Executing BIOS.BAT
InsydeH20 Setup Utility Rev. 3.5
Information Main Security Boot Exit
Item Specific Help
Boot priority order:
USe <> or <> to
select a device, then
press <F6> to move it
down the list, or <F5>
to move it up the list.
Press <Esc> to escape
the menu.
1. HDD 0: ST960821A
2. ATAPI CDROM: MATSHITADVD
3. USB FDD:
4. Network Boot: Realtek Boot Agent
5. USB HDD: xxxx USB
6. USB CDROM:
F1 Help Select Item F5/F6 Change Values F9 Setup Default
ESC Exit Select Menu Enter Select>SubMenu F10 Save and Exit
To Next Page
Loading...
