3-44 Machine Maintenance Procedures
Microphone Removal 0
Prerequisite:
LCD Panel Removal
1. Lift foil tabs (A) to reveal microphone cable (B). (Figure 3-44)
Figure 3-44. LCD Module Cover without Panel
2. Remove microphone cable from LCD cover.
3. Remove microphone module (C) from guide on LCD cover.
Microphone Installation 0
1. Align and install microphone module (F) to guide on LCD cover. (Figure 3-44)
2. Install microphone cable (B) to LCD cover. (Figure 3-44)
3. Secure foil tabs (A) over microphone cable.
4. Install LCD panel.
To Next Page
Loading...
