Machine Maintenance Procedures 3-45
3G Antenna Removal 0
Prerequisite:
LCD Panel Removal
1. Lift foil tabs (A) to reveal 3G main (B) and auxiliary (C) cables. (Figure 3-45)
Figure 3-45. LCD Module Cover without Panel
2. Remove 3G cables from guides on LCD cover.
3. Remove foil (E) and (F) covering 3G main and auxiliary antennas from LCD cover.
4. Remove 3G antennas.
3G Antenna Installation 0
1. Secure foil (E) and (F) covering 3G main and auxiliary antennas on LCD cover.
(Figure 3-45)
2. Secure 3G main (B) and auxiliary (C) cables to guides on LCD cover.
3. Secure foil tabs (A) over 3G cables.
4. Install LCD panel.
To Next Page
Loading...
