3-42 Machine Maintenance Procedures
LCD Panel Installation 0
1. Connect LCD cable (G) to LCD panel connector (J). (Figure 3-42)
2. Secure tape (H) to cover LCD cable and LCD panel connector.
3. Align LCD cable with foil tabs (F) on LCD cover. (Figure 3-40)
4. Secure foil tabs over LCD cable.
5. Connect camera cable (D) to camera connector (E).
6. Align and install LCD panel (C) to guidepins (B) on LCD cover. (Figure 3-39)
7. Install and secure screws (A) to LCD cover.
8. Install LCD bezel.
ID Size Quantity Screw Type
A M2.0x3.0 t=4 4
To Next Page
Loading...
