3-46 Machine Maintenance Procedures
WLAN Antenna Removal 0
Prerequisite:
LCD Panel Removal
1. Lift foil tabs (A) to reveal WLAN main (B) and auxiliary (C) cables. (Figure 3-46)
Figure 3-46. LCD Module Cover without Panel
2. Remove cables from guides on LCD cover.
3. Remove foil (E) and (F) covering WLAN main and auxiliary antennas from LCD cover.
4. Remove WLAN antennas.
WLAN Antenna Installation 0
1. Secure foil (E) and (F) covering WLAN main and auxiliary antennas on LCD cover.
(Figure 3-46)
2. Secure WLAN main (B) and auxiliary (C) cables to guides on LCD cover.
3. Secure foil tabs (A) over WLAN cables.
4. Install LCD panel.
To Next Page
Loading...
