Acer Aspire ONE 722 - Camera Module Removal; Camera Module Installation

Machine Maintenance Procedures 3-39
Camera Module Removal 0
Prerequisite:
LCD Bezel Removal
1. Locate camera module (D) on LCD cover. (Figure 3-38)
Figure 3-38. Camera Module
2. Remove camera module cable (A) from connector (B).
3. Remove camera module from adhesive strip and guidepins (C) on LCD cover.
Camera Module Installation 0
1. Align and install camera module (D) with guidepins (C) on LCD cover. (Figure 3-38)
2. Install camera module cable (A) to connector (B).
3. Install LCD Bezel.
A
B
C
D
C