Machine Maintenance Procedures 3-15
4. Disconnect HDD board (F) from HDD connector (G).
5. Remove HDD bracket (H) from HDD module.
HDD Module Installation 0
1. Install HDD bracket (H) HDD module. (Figure 3-10)
2. Connect HDD board (F) to HDD connector (G).
3. Install and secure screws (E) to HDD module.
4. Install HDD module (C) to lower case. (Figure 3-9)
5. Connect HDD module FFC (A) to mainboard connector (B).
6. Install uniload door.
ID Size Quantity Screw Type
D M3.0x3.0 Ni 2
To Next Page
Loading...
