Machine Maintenance Procedures 3-19
Keyboard Removal 0
Prerequisite:
Uniload Door Removal
1. Locate and unlock latches (A). (Figure 3-14)
Figure 3-14. Keyboard Latches
Keyboard is attached to mainboard by Flexible Printed Circuits (FPC) cable. Use
caution when lifting or removing keyboard.
2. Lift keyboard from upper case.
3. Turn keyboard over onto palmrest. (Figure 3-15)
Figure 3-15. Keyboard FPC
4. Disconnect keyboard FPC (B) from mainboard connector (C).
5. Remove keyboard (D).
To Next Page
Loading...
