Acer PH530 - Page 47

PH530
5-7
Condential
No Step Procedure Photo
6
1. Choose “Flash
Loader”
2. Click “Browse” to
search the rmware
le. (PH530)
3. Select the item “Skip
Boot Loader Area
4. Select 64KB).”
5. Click “Reset Bus” to
erase the ash
memory.
(Note: If the error mes-
sage “cannot open USB
driver - No projectors
found” appears, please
replug the USB Cable
and check driver again
and then re-do the
above procedures.
Note:
1
2
3
5
4