Acer PH530 - Page 55

PH5306-6
Condential
No Step Procedure Photo
7 Check
the whole
process
1. In the “Read Item”
Selections, choose
the Port that you use.
Ex: If you use the
Analog (Digital)
Port, choose
“Analog(Digital)”
in the “Read
Item”.
(Note: After clicking
“Read” , if the code
in the Serial Blank is
scrambled, please make
a check in “Trans”.)
2. Click on “Read” to
read EDID informa
tion.
3. The “EDID Informa
tions” will show the
result.
4. Click “Reset” to do
the next unit or “Exit”
to close the EDID
program.
Note: Please make sure the EDID of VGA and HDMI has burned in.
3 2
4
1