Acer Power - Page 136

AcerPower Minitower (M11E/IDCATX-2) User's Guide
136
Starting, A-6
When handling a disc, A-3
CD-ROM drive DMA mode, 2-14
Component installation, 3-7
ESD precautions, 3-10
Installation procedures, 3-11
Installing a 3.5-inch diskette drive, 3-16
Installing a CD-ROM drive, 3-20
Installing a hard disk, 3-22
Installing a system board, 3-10
Installing drives, 3-16
Installing expansion boards, 3-14
Installing extra hard disks, 3-25
Opening the housing, 3-7
Reattaching the power supply, 3-12
Reinstalling the cover, 3-27
Removing the power supply, 3-8
Configuration table, 2-26
Connector functions, 1-5
Correcting error conditions, 1-21
CPU frequency, 2-41
CPU multiple, 2-41
D
Date, 2-27
Date and time, 2-27
Date, 2-27
Time, 2-28
Disk drive control, 2-34
Disk drives, 2-9
Advanced PIO mode, 2-14
CD-ROM drive DMA mode, 2-14
Floppy drives, 2-9
Hard disk block mode, 2-13
Hard disk size > 504 MB, 2-13
IDE drives, 2-11
LS-120 drive compatible as, 2-10
DMI BIOS version, 2-8
Download new versions manually, 4-12
E
ECP DMA channel, 2-17
Enter setup, 2-1
Entering setup, 2-1
Error conditions, correcting, 1-21
Error messages, 1-18
Correcting, 1-21
Software, 1-18
System, 1-18
ESD precautions, 1-8
Exit setup, 2-43
External cache, 2-4, 2-36
Extra hard disks, installing, 3-25
F
Fast boot, 2-24
Features, 1-1
First hard disk drive, 2-24
Floppy disk controller, 2-18
Floppy drive A, 2-4
Floppy drive B, 2-5
Floppy drives, 2-9
Front panel, 3-2, 3-7
Front panel connectors, 1-7
G
Graphics aperture size, 2-40
H
Hard disk block mode, 2-13
Hard disk size > 504 MB, 2-13
I
IDE controller, 2-18
IDE drives, 2-11
IDE hard disk standby timer, 2-21
IDE primary channel master, 2-5, 2-11
IDE primary channel slave, 2-5, 2-11