Index
137
IDE secondary channel master, 2-5, 2-11
IDE secondary channel slave, 2-5, 2-11
Installable applications software, 4-5
Installation procedures, 3-11
Installing a 3.5-inch diskette drive, 3-16
Installing a CD-ROM drive, 3-20
Installing a DIMM, 1-15
Installing a hard disk, 3-22
Installing a Pentium II processor, 1-12
Installing a system board, 3-10
Installing components, 1-8
Installing components on the system board
Post-installatiion instructions, 1-9
Pre-installation instructions, 1-8
Installing drives, 3-16
Installing expansion boards, 3-14
Installing extra hard disks, 3-25
Installing McAfee VirusScan, 4-11
Installing system board components, 1-8
Intel LANDesk Client Manager, 4-14
Administrator Version, 4-17
Setting up, 4-15
Using, 4-16
Internal cache (CPU cache), 2-36
Internal cache size, 2-4
Internal components, 3-4
IRQ, 2-16
J
Jumper and connector locations, 1-4
Jumper settings, 1-5
Jumpers and connectors, 1-4
Connector functions, 1-5
Jumper settings, 1-5
Locations, 1-4
L
Load default settings, 2-42
LS-120 drive compatible as, 2-10
M
Main board ID, 2-7
Main board S/N, 2-8
Major components, 1-2
System board layout, 1-3
McAfee VirusScan, 4-10
Download new versions manually, 4-12
Installing, 4-11
Updating data files, 4-11
Updating VirusScan data files, 4-11
Memory at 15MB-16MB reserved for, 2-37
Memory configurations, 1-14
Memory parity mode, 2-37
Memory test, 2-25
Memory upgrade, 1-14
Installing a DIMM, 1-15
Memory configurations, 1-14
Reconfiguring the system, 1-17
Removing a DIMM, 1-16
Memory/cache options, 2-36
Modem ring indicator, 2-22
N
Num lock after boot, 2-25
O
Onboard device settings, 2-18
Onboard peripherals, 2-15
Base address, 2-15, 2-16
Device settings, 2-18
ECP DMA channel, 2-17
Floppy disk controller, 2-18
IDE controller, 2-18
IRQ, 2-16
Operation mode, 2-17, 2-33
Parallel port, 2-6, 2-16
PS/2 mouse controller, 2-18
Serial port 1 and 2, 2-15
SMBus interrupt (IRQ9), 2-19
USB host controller, 2-19
To Next Page
Loading...
