EU Declaration of Conformity
Issued in accordance with ISO/IEC 17050-1:2004.
We,
Acromag Inc.
30765 S Wixom Road,
Wixom, MI 48393 USA
as the manufacturer, declare under our sole responsibility that the product(s),
APM765 / VPM3000 Process and Temperature Meter
to which this declaration relates, is in conformity with the European Union Directives
shown below:
2014/35/EU Low Voltage Directive
2014/30/EU EMC Directive
2011/65/EU RoHS Directive
This conformity is based on compliance with the application of harmonized or applicable
technical standards and, when applicable or required, a European Union notified body
certification.
Standards:
EN 55011:1998
EN 61000-6-2:2001
EN 61010-1:1995
EN 61326:2006
The standards EN 55011:1998, EN 61000-6-2:2001, EN 61010-1:1995, and EN
61326:2006 are no longer harmonized. The requirements of these standards have
been checked against the harmonized standards EN 55011:2009+A1:2010, EN
61000-6-2:2005, EN 61010-1:2010, and EN 61326:2013 and there were no major tech-
nical changes affecting the latest technical knowledge for the products listed above.
Product Markings:
Signed for and on behalf of Acromag Inc.:
Name: Charles Paul
Company: Acromag Inc.
Title: Agency Approval Engineer
Date: 06/15/2020 Document No: DoC PD765AM {06/15/20}
8502-031C
To Next Page
Loading...
Need help?
General