Acromag Vertu Series User Manual

Vertu Series VPM3000 Process Meters
& Temperature Transmitters
Instruction Manual
ACROMAG INC.
30765 S Wixom Road • Wixom MI 48393 USA
Tel (248) 624-1541 • www.acromag.com
8501-180
• 1/8 DIN Digital Panel Meter with NEMA 4X, IP65 Front
• 4-20 mA, ± 10 V, TC & RTD Field Selectable Inputs
• Easy Field Scaling in Engineering Units without Applying an Input
• Full 4-Digit Display, 1.20" (30.5 mm)
• Shallow Depth Case Extends Only 3.6" (91 mm) Behind Panel
• Isolated 24 VDC @ 200 mA Transmitter Power Supply Option
• 2 Relays + Isolated 4-20 mA Output Options
• Free PC-Based DisplayWizard Programming & Monitoring Software
• No Assembly Required
• Sunlight Readable Display
• Operating Temperature Range: -40 to 65°C (-40 to 149°F)
• UL & C-UL Listed. E244293; UL 508 Industrial Control Equipment
• Input Power Options: 85-265 VAC / 90-265 VDC or 12-36 VDC / 12-24 VAC
• Duplex Pump Controller with Alternation Capability
• External Contacts for Remote Button Operation
• USB, RS-232, & RS-485 Serial Communication Adapters Options
• Modbus RTU Communication Protocol Standard
• Copy Meter Settings to Other Vertu Meters
• Password Protection
• Max/Min Display
• High & Low Alarms with Multiple Reset Actions
• 3-Year Warranty

Acromag Vertu Series Specifications

General

Series	Vertu
Input Range	±10V, 0-20mA
Resolution	16-bit
Communication Interface	Ethernet
Operating Temperature	-40°C to 70°C
Enclosure Rating	IP20

Summary

Product Overview and Specifications

Introduction to Vertu VPM3000

Versatile meter for process/temp applications, shallow depth, NEMA 4X front panel.

Product Specifications

Detailed technical specifications for general, process input, and temperature inputs.

Installation and Connections

Panel Mounting Procedure

Steps for preparing the panel, mounting brackets, and securing the meter.

Wiring and Connections Guide

Guide to connector labeling and terminal connections for various meter configurations.

Signal Input Connections

Diagrams and instructions for connecting voltage, current, RTD, and thermocouple signals.

Setup, Operation, and Software

Setup Menu and Navigation

How to navigate the meter's setup menu using front panel buttons.

Scaling and Calibration Procedures

Procedures for scaling meter display and calibrating input signals.

Relay and Alarm Configuration

Setting relay action, set points, fail-safe, and time delays for alarms.

DisplayWizard Software Overview

Introduction to the software for remote programming, monitoring, and data acquisition.

Meter Operation and Max/Min Readings

How to operate the meter, view Max/Min readings, and use front panel buttons.

Troubleshooting, Compliance, and Support

Troubleshooting Tips

Common issues and solutions for meter operation and communication problems.

Factory Defaults and Reset Procedure

Procedure for resetting the meter to factory default settings.

Safety and Compliance Information

Important safety warnings, compliance information, and EU directives.

Contact and Support Information

Contact details for Acromag support and manual download information.