ENGLISH
PSPIX² • User manual
10
- Always comply with anti-contamination and sterilization measures when using accessories such as
positioning holders, the generator and IPs. It is essential to follow the user instructions supplied by the
manufacturer in order to avoid any risk of cross-contamination.
- Do not drop the PSPIX system. After dropping the device do not reconnect the PSPIX system, but send
it to your approved distributor or to the SOPRO Service Department in order to avoid any damage to
eyes and/or any malfunction of the PSPIX system.
- The PSPIX system meets standard IEC 60601-1. Only peripherals that meet standard IEC 60950-1 may
be connected to the PSPIX system in order to avoid any malfunction of the PSPIX system.
CAUTION:
- To ensure safe use and correct operation of the PSPIX system, it is essential to use the power supply
provided with the PSPIX system. The power supply provided with the PSPIX system must only be re-
placed with the same model: FRIWO FW7362M/12 100 – 240 V~ 50/60 Hz 700 mA, in order to avoid any
risk of electrocution and/or malfunction of the appliance.
- Use of the PSPIX system may, due to its EMC characteristics, affect or cause a malfunction of other
appliances in the vicinity.
- The use of other devices may interfere with the PSPIX system, due to their EMC characteristics. This
can may cause a PSPIX system malfunction.
- The reading of IPs and the transfer of the image from the PSPIX system to a computer may be sensi-
tive to electromagnetic disturbance, this can also cause a disturbance to the computer network. A
stable Ethernet network must be maintained at the dental practice or clinic, in order to avoid any
malfunction of the PSPIX system.
- Do not move or bang the PSPIX system when it is processing the image, in order to avoid any risk of
the system malfunction.
WARNING :
You will fi nd other safety information in all the chapters of this user manual. Please read this entire
user manual.
To Next Page
Loading...
