Acteon PSPIX - PSPIX Technical Specifications

ENGLISH
PSPIX² • User manual
51
TECHNICAL SPECIFICATIONS
PSPIX² System
• Dimensions: H 205 mm x D 194 mm x W 154 mm (Height x Depth x Width)
• Weight: 2.6 kg
• Operating voltage: 12 V
• Operating current: less than 2.5 A
• Bit depth: 14 gray scale bits
• Theoretical resolution: greater than or equal to 20 lp/mm in high resolution.
• Actual resolution: greater than or equal to 20 lp/mm in high resolution.
• Ambient operating temperature: +10 °C to +40 °C, 30 to 85 % relative humidity, 700 to 1060 hPa.
• Ambient conditions for storage/transport: -10 °C to +45 °C, 20 to 85 % relative humidity, 700 to1060 hPa.
• Interface cable: for Ethernet port connections, use a CAT5 LAN cable. The Computer/Ethernet switch that
the PSPIX system is connected to must be appropriately approved (e.g. per EN 60950, IEC60950, UL 60950).
• Continuous operation
• Not protected against running water (IPXO)
• Class 1 Equipment
• External power supply: 100 – 240 V ~ 50/60 Hz 700 mA FRIWO FW7362M/12
• Class 1 laser product according to EN 60825-1:2007
Complies with the essential requirements of European Directive 93/42/EEC concerning medical devices.
• Compliant with IEC 60601-1.
• Not suitable for use in the presence of fl ammables such as anesthetic, oxygen or nitrous oxide.
https://stomshop.pro