- the correct distance between focal spot and skin
- dimension, direction and centering of X-ray beam
- the realization of different radiographic technique (bisecting and parallel technique).
During X-ray exposition, the collimator cone comes in contact with the skin of the patient.
Before each exam, it is necessary to apply to the cone a disposable protective cover designed to cover the end
part of the X-ray generator.
Such protection has two functions: avoid crosscontamination (from patient to patient) and prevent the possibi-
lity of inammations or other types of reactions of the skin caused by contact with the material that constitutes
the cone.
OPTIONAL ACCESSORIES
}SECOND CONTROL BUTTON
}x-mind ac® LIGHT (X-ray signalling lamp for external use)
}x-mind ac® ECB (remote control button)
PLEASE NOTE
For the installation of the optional accessories, refer to the specic installation manuals supplied.
2.3. OVERALL DIMENSIONS
Fig. 2A, 2B, 2C give the overall dimensions of the possible supply conditions:
BRACKET 400: L = 41 cm – 16” 9/64
BRACKET 800: L = 82,5 cm – 32” 31/64
BRACKET 1100: L = 110 cm – 43” 5/16
BRACKET 400
To Next Page
