10 I
I - 2 General Operations for 200S
Operating Modes
The 200S has two operating modes: Distance-To-Go
(INCREMENTAL), and Actual Value (ABSOLUTE). The Actual Value
mode always displays the current actual position of the tool, relative
to the active datum. In this mode, all moves are done by traveling until
the display matches the nominal position that is required. The
Distance-To-Go feature enables you to approach nominal positions by
traversing to display value zero. When working within the Distance-
To-Go mode you can enter nominal coordinates as either absolute or
incremental dimensions.
Milling applications have only the tool length offsets active while in the
Actual Value Mode. In the Distance-To-Go mode, both the diameter
and length offsets are used to calculate the amount of “distance-to-
go” required to get to the desired nominal position. This is relative to
the edge of the tool that will be doing the cutting.
Turning applications have both diameter and length offsets in both the
Actual Value and Distance-To-Go modes.
Press the ABS/INC soft key to toggle between these two modes. To
view other soft key functions in either Actual Value or Distance-To-Go
mode, use the LEFT/RIGHT arrow keys.
The Turning application provides a quick method for coupling the Z
axes positions on a 3 axis system. For more information, see "Z
Coupling" on page 42.
To Next Page
Loading...
General